HVAC dampers help to monitor air volume by conducting systems and regulate them. In the ductwork with low to medial airflow velocity, control dampers are normally mounted. It can be used to produce positive shutdowns and also to monitor HVAC low-leakage systems automatically.
Dampers are often used in zoning and zone control systems. Air dampers are used to regulate material movement in industries that move gases and liquids through pipes and pipes.
Air Control Dampers come in a variety of sizes and shapes, including square, circle, and rectangular backdrafts, and it is critical to choose the right one for the task. The position, configuration, and function of a damper decide the form of the damper. Zero leakage bubble-tight dampers, volume control dampers, motorized volume dampers, and so on are examples of such dampers.
In this blog, we will discuss volume control dampers.
The volume control damper is a device that regulates airflow through an air duct. Complete manual quadrant or motorized actuators are available with this unit. Volume Control Dampers are ideal for systems requiring air control and can be made of galvanized steel, stainless steel, or aluminium. If you are familiar with the characteristics of volume control dampers, it will be simple to choose from the huge list of dampers offered by VAV manufacturers in the UAE. The size of the volume damper and the area where it will be installed are often the most important factors to consider when selecting one.
The Volume Control Dampers help regulate the volume of airflow to the other sections of the device. These dampers can be fixed within the duct itself and can be manually or automatically. In determining individual HVAC technologies and entire systems, an understanding of the interdependence of HVAC technology between them, as well as other electric loads and maintenance and operational practices is fundamental. As with lighting, HVAC systems have broad and varied technology and potential configurations.
These dampers can be immovable or fixed within the air conditioning system. The volume control dampers’ doors can be opened and closed manually to change them. The ash-pan is also accessible through the volume damper, which allows for the removal of accumulated clinker and the removal of ashes.
From their wide range of products, motorized volume control damper suppliers can fabricate and supply a number of sizes and styles of quantity dampers. Volume Control Dampers made of stainless steel and aluminium sheet are recommended because they have a higher inherent resistance to corrosion and abrasion.
They are ideal for places where there is a lot of moisture and hydration because of the material and construction.
These dampers are simple to adapt to the surrounding temperature and humidity, making them effective at reducing power consumption. The use of the proper volume control damper lowers energy bills. They are effective at lowering the pressure in zone controls, which increases HVAC performance.
Volume control dampers are available for either parallel or opposed blade operation, with each design having its own set of characteristics depending on the type of operation. Parallel blade dampers are designed for all blades moving in the same direction and parallel to one another. When the damper has two positions, open and close, the parallel blade orientation is used. Opposed blade dampers are used on dampers that modulate airflow and are built with blades that pass in opposite directions. When it comes to the location of the dampers within the air conditioning system, they are either fixed or immovable.
The door of the volume control dampers can be opened or closed manually. They even make it possible to empty the ash-pan and dispose of the clinker that has accumulated. The volume control damper’s primary role is to:
The dampers consist of several plates, blades, axles, coils, blade fasteners, and other components adapted to the particular application of the damper. The damper’s actuator is used to control the damper’s location using signals from the building automation system, thermostats and controls, pressure switches, and relays. The capacity of the actuator to sufficiently open and close the damper, as well as the amount of torque it can provide, are used to determine which actuator to use. This is usually determined by the following factors:
Always check the seller’s certification label, positive customer reviews, and company credibility before purchasing a damper. Leading volume control damper manufacturers, such as Technalco, are known for producing high-quality products at a reasonable price.
Technalco aluminium engineering factory is a leading volume control dampers manufacturer in UAE of HVAC products and a variety of sheet metal components. We have grown to become one of the best metal component suppliers.
In a real sense, our business has achieved manufacturing and trading convergence. We not only have the manufacturing capability to provide OEM service, but we also have a large supply network to provide one-stop service.
As a result, we have established a diverse product line and are able to supply our customers in a timely and efficient manner.
The foundation of our business is quality. Our services as being a leading VAV manufacturer in UAE can be used by any interior and construction firm, architects, designers, hardware stores, and even small trading companies. We recognize the significance of deadlines and requests. As a result, we are well-positioned to deliver high-quality products that will enable you to keep your commitments.
Industries & Building is dedicated to environmental protection. We have introduced strict policies across the board to ensure that we are reducing our carbon footprint and that our vendors are complying with environmental regulations.