Ever wonder if there’s an easy way to clean all the fish waste and uneaten food that’s fallen in between the aquarium’s gravel or substrate? The good news is that there’s no need to dump out and wash everything in the sink. Instead, you can vacuum up the detritus with a simple aquarium siphon – no batteries required!
You just need two items: an aquarium siphon (also known as a gravel vacuum, gravel cleaner, or siphon kit) and a bucket to hold the dirty water. If you plan on cleaning multiple tanks, it might be easier to get a large trash can on wheels to put the dirty water. However, the bucket is optional if your siphon’s hose is long enough to reach a nearby sink or even the backyard to water your outdoor plants.
A siphon basically consists of two sections: the plastic tube that goes into the aquarium and the long, flexible hose that goes into the bucket.
We personally like using the Python Pro-Clean siphon because its high-quality, flexible tubing doesn’t kink or get twisted as easily. (As an Amazon Associate, we earn from qualifying purchases, and commissions may be earned from the link above.)
There is no need to remove the fish while using the aquarium siphon, since the process of catching them is more stressful than slowly vacuuming around them. However, you should move any aquarium decorations away from the area you plan on vacuuming because waste likes to collect underneath them. Some people like to scrub off the algae and clean the filter beforehand, so that all the excess particles in the water have a chance of being removed by the siphon.
Magnetic algae scrappers are great for cleaning off algae, especially if you have the matching blade attachment. Just make sure to get the glass or acrylic version that matches your aquarium walls.
Aquarium siphons use gravity to suck the water and debris out of your aquarium. To start the siphon, make sure the hose end of the siphon is inside the bucket. (Some people use a small clamp to make sure the hose doesn’t slip out of the bucket.) Then completely submerge the tube inside the aquarium so that it fills with water. You can easily do this by keeping the tube at a diagonal angle with the tube opening pointed upwards.
Raise the tube out of the water and above the aquarium rim until water starts flowing through the hose and into the bucket.
As soon as the water has drained halfway out of the tube, quickly plunge the tube back into the water at the same diagonal angle (such that the tube is still pointed upwards). The tube opening must be completely underwater in order for the water to continue draining into the bucket.
Once water is freely flowing into the bucket, point the tube opening downwards toward the substrate at the bottom of the tank.
Note: if the water level is too low or the tank is too small to maneuver the tube using this technique, you may need to use another method to start the siphon. The easiest method is to place the tube end in the aquarium and suck on the hose end with your mouth to get water flowing through it. Quickly place the hose end into the bucket, or else you may get a mouthful of dirty fish water.
Push the siphon into the gravel or sand, and let it start vacuuming up some of the substrate. Because the substrate is heavier than the fish waste, you can periodically crimp the hose with your other hand that’s not in the water to briefly stop the suction. This causes the heavy substrate to fall out of the tube, while the lighter debris still floats inside the tube and gets sucked up as soon as you un-crimp the hose and start vacuuming again.
Systematically vacuum the substrate back and forth in rows, as if you’re mowing the lawn. Use this method to clean about a third of the aquarium substrate. The next time you do a water change, you can vacuum the next third of the tank.
Once you’re ready to stop siphoning, cover the tube opening with your hand and lift the tube out. The tube will suction to your hand and prevent the dirty water from falling back into the aquarium. Flip the tube upwards and let the remaining water in the siphon drain into the bucket.
If you're still not able to start the siphon, click on the video demonstration below to watch this simple process in action:
And that’s it! Refill the aquarium with new water that’s roughly the same temperature as the old water, and don’t forget to add dechlorinator to remove the chlorine, chloramine, and other toxic chemicals from the water.
If you want to fill your fish tank (or multiple tanks) straight from the sink faucet without having to lug buckets of water back and forth, all you need is a garden hose, faucet hose adaptor, and the Python hook.
To find out how often you need to do water changes on your aquarium, download our free infographic that guides you step-by-step through the process.