C type single arm hydraulic press electrical control safety measures
C type single arm hydraulic press electrical control safety measures
Sinco Product Page
C type single arm hydraulic press electrical control safety measures:
1. Static and emergency stop button: in case of abnormality, press the "static" button to stop the action. Press the "emergency stop" button to stop the motor.
2. The motor control part has thermal protector, circuit breaker and other devices to protect the motor from overload damage and over-current short circuit protection.
3. Power supply voltage: AC 380V ± 5%, frequency 50Hz ± 2%, three-phase four wire system. The compressor must be effectively grounded according to the current safety regulations (the grounding resistance should be ≤ 1 ohm).
Electrical control design requirements of C-type single arm hydraulic press manufacturer:
1. Electrical control circuit and machinery are closely matched, so it is necessary to understand the relationship between mechanical structure and electrical control in detail.
2. The speed change impulse control is set in the control circuit to make the speed change smoothly.
3. For the convenience of operation, multi control is adopted to realize the start and stop of two places.
4. It has perfect electrical interlocking, short circuit, zero voltage, overload and over travel limit protection.
Zaozhuang Make Machinery Co., Ltd. is a company specializing in the production of hydraulic press equipment, C-type hydraulic press, four column hydraulic press, gantry hydraulic press, hydraulic bending machine and other styles, HP-63C, HP-100, HP-150, HP-200 and other models for your choice. We support customized models, welcome new and old customers to buy.
If you want to learn more, please visit our website test.