What are the Tips for Installing Hot and Cold Faucets in the Kitchen?

26 Feb.,2021

As a Copper Hot and Cold Basin Faucet Wholesale, share it with you.


As a contact, share it with you.

1. Clean water pipes

Before installing the faucet, everyone should pay attention to close the main sluice first, and then clean the debris in the water pipe. Especially in newly installed houses, there will be relatively coarse impurities such as sand and gravel in the water pipes. In order to avoid the blockage of the faucet in the future, to ensure the water output of the water pipe. It is recommended to keep the water before installation to allow the water to wash out the impurities in the water pipe. You can also use a softer brush to clean it to remove the dirt until the subsequent water becomes clear and clean. Just proceed to the next step of the installation.

304 Stainless Steel Kitchen Sink Faucet

304 Stainless Steel Kitchen Sink Faucet

2. Install the faucet

Because the kitchen faucet is frequently used and is often turned and easily loosened, the base must be firmly installed, so the lock nut must be tightened. Under normal circumstances, facing the faucet on the left is the hot water supply pipe, and on the right is the cold water supply pipe. Except for special signs, do not install the cold and hot water supply pipes backwards. Then put the copper buckle and rubber pad into the hose, and then connect one end of the hose to the port of the sink, then pass the rubber pad into the hose, pass the copper wire into the hose, and then screw the faucet on the copper wire On the tube. At the same time, the copper wire should be fixed firmly. Finally, put it into the interface of the sink, then tighten it, and finally connect the same hose to the water outlet. The tools attached to the faucet should be kept for future maintenance. When disassembling the water inlet hose, do not wrap the sealing tape or use a wrench, just tighten it by hand, otherwise the hose will be damaged.

3. Follow-up considerations

After the installation is complete, wipe the faucet clean, and everyone must do a follow-up leak-proof inspection. When using the faucet, do not switch it forcefully, which will not only affect the use of the faucet, but also have a certain impact on its life. Our company also has 304 Stainless Steel Kitchen Sink Faucet on sale, welcome to contact us.